Cleaning windows right after a home renovation job isn’t going to be like cleaning them throughout the year. You’ll need to remove dust, paint, adhesive tape, and other debris from those windows even if they’re newly installed.
- Don’t use standard cleaning tools or methods
If you use abrasive tools or simply use a regular paper towel to wipe off dirt and dust from the windows can actually cause it more harm than good as you’re actually rubbing that debris into the glass. You’re always going to waste time and money cleaning those windows using regular cleaning supplies if you don’t know the proper method of removing construction dust and other debris from those windows. After a construction project, it’s not uncommon to see paint droplets splattered almost everywhere, including the windows. You will also see splotches of grout, caulk, and adhesives that need to be cleaned from the glass. Trying to clean this dirt and debris using a rag will leave behind stains and streaks which will make your cleanup even more challenging and time-consuming.
- Use the proper tools
Construction dust is composed of wood remnants and drywall during the construction. As it is, the dust these materials create is thicker and harder to remove. You’ll need special equipment for that like a heavy-duty, wet-dry vacuum, shop rags, glass cleaning squeegee, glass scraper, a good quality squirt bottle, and old newspaper pages. A heavy-duty wet and dry vacuum cleaner will help you clean construction debris as no household vacuum can. Sharp dust can ruin the filter, hose, belt, and sweeper of a standard household vacuum cleaner. It might even damage the canister or tear a hole through the bag.
Shop rags can be found in home improvement stores. These are thick and made of soft materials so it won’t scratch glass surfaces. Glass squeegee is an essential tool when it comes to cleaning glass. The one you should use should have a soft rag on one side and a rubberized lip on the other. Make sure you choose one that’s heavy-duty. You should also have a glass scraper, a squirt bottle, glass cleaner, and newspaper pages.
- Start with vacuuming
You want to begin by vacuuming all the loose dust and debris that have settled into the windows. You can lightly brush the glass and the frame to shake off some of the debris before vacuuming them. Use the vacuum to remove caulk and other types of adhesive residue from the glass instead of using a rag. This is to ensure that you don’t scratch the glass surface during the cleanup. It’s also recommended that you remove dust and debris around and above the windows. Use a vacuum attachment or even a broom to remove dust that may have clung to the walls and other crevices.
- Glass cleaner
Use the glass cleaner to remove paint, caulk, and other sticky stuff on the glass. Gently scrape them away using the glass squeegee. Make sure you hold the cleaner at an angle as you scrape across the surface of the glass. You can also use the blade on the outer edges of the window and inside the frame. At this point, avoid using the shop rag to dry the glass. You want to use as much water to soak the surface of the glass. Saturate any dust or paint to make it easier to remove with a glass cleaner. Next, use the rubber squeegee to wipe away water and residue from the glass surface. With each wipe, use the shop rag to wipe the rubber edge of the squeegee to remove the dirt and debris the clung to the rubber edge.
- Newspaper to finish
Cleaning a newly installed window using a glass cleaner and rag simply won’t do the job. It will leave streaks and watermarks that are unsightly. But there is a simple trick to finish your post-construction window cleanup that will result in sparklingly clean windows. All you have to do to leave streaks on your newly installed window after cleaning, spray the windows with glass cleaner before wiping it off with crumpled newspaper pages instead.
This post, it’s content & information was generously provided by https://windowcleaningwinnipeg.com